How to tighten a woolen hat that is too loose? How to tighten a woolen hat that is too loose?

It is a cold winter now. We often see people wearing woolen hats outside. Woolen hats are a very suitable warming artifact to wear in winter. However, many people have encountered the problem that woolen hats are too loose and always fall off when worn.

If the woolen hat is too loose, you can sew a lining inside the hat, or you can pin two pins inside the hat to fix the hat. When pinning, shrink the edge of the hat to make the hat smaller, so that the woolen hat will not be too loose.

It is common in life that a woolen hat is loose. In this case, we can sew a strip of cloth with a reasonable color on the back of the hat with wool. Of course, when sewing, we also need to shrink the edge of the hat to reduce its circumference, so that your head does not reach the top of the hat.

1. Put the woolen hat in 80-degree water and iron it repeatedly for 3 to 4 times. If the water gets cold, switch to hot water. When the shape is restored to a certain level, put it in cold water to set. When drying, be careful not to hang it up, as it will stretch it even more. Just lay it flat to dry.

2. If the whole hat becomes bigger, heat the whole hat at high temperature. You can use a pot to steam it for about 20 minutes, then take it out and measure it.

3. Cut the cardboard into the shape of a hat, stuff it into the hat, and then use an iron to iron the hat flat.

New knitted hats also need to be washed, because they will accumulate bacteria during transportation, so they should be washed in time. Before washing the hat, dust off the hat, soak it in cold water for 10-20 minutes, squeeze out the water, put it in laundry detergent and gently rub it, and finally rinse it with clean water. After squeezing out the water, shake it loose, put it in a net bag to avoid pulling and deformation, and hang it in a ventilated place to dry.